TC Electronic Archives - Page 3

TC Electronic has introduced the WireTap Riff Recorder, a compact pedal that can record 8 hours of recording time stored in CD audio quality. Similar to the Ditto, the new pedal has pared down controls for “plug and play” capabilities. Pressing the footswitch begins and ends the recording process while play, back, and next buttons allow you to listen back...

TC Electronic has introduced the Sub ‘N’ Up, an octaver pedal that features their next-generation octave engine. The unit has one octave up control and two sub-octaves with a dry control to dial in your direct signal. The first sub control mixes in an octave down signal while the sub 2 control mixes in a signal two octaves lower for...

TC Electronic has expanded their new K-series bass cabinets with a new 1×15″ model. The K-115 Bass Cab is fitted with a custom-made 15-inch driver and a one-inch titanium tweeter to pump out up to 400 watts. Similar to the rest of the lineup, the cab is built as a lightweight design for gigging musicians. Its sturdy plywood construction includes...

TC Electronic is now shipping the Bonafide Buffer. The unit, which is their first dedicated buffer pedal, is 100% analog and offers a 1M ohm input resistance and 1K output resistance. This, the company writes, allows for the instrument signal to flow “untroubled through the entire signal chain.” It also has an intelligent relay system that automatically switches to true...

TC Electronic’s Ditto series of loopers got a little bigger at the NAMM Show this year. The Ditto X4 Looper builds on the simplicity of the original Ditto by adding two loop tracks, two loop modes, seven loop effects, loop decay, MIDI sync, loop import/export, and stereo inputs and outputs. The list of options and effects offer the option to...

TC Electronic has taken the SpectraComp found in some of their bass amps and put it into a TonePrint-enabled effects pedal. The multi-band compressor is specifically tuned for bass and housed in a mini enclosure to fit on tight pedalboards. Based on their MD3 multi-band dynamics engine, the SpectraComp Bass Compressor features a frequency specific compression algorithm that the company...

TC Electronic has expanded their RS bass cabinet lineup with the RS115. Fitted with a 15-inch Eminence driver, the cab is described as having a warm and deep sound while delivering 600 watts at 8 ohms. It’s built with handcrafted plywood construction including 18mm plywood side panels with a 18mm rounded, carved hardwood corners. As part of the RS series,...

TC Electronic’s PolyTune series is getting two new models added to the lineup with the PolyTune Clip and PolyTune 2 Blacklight. Both tuners support both guitar and bass tuning with polyphonic and chromatic modes. The PolyTune Clip clips onto the headstock of your bass and automatically switches between polyphonic and chromatic tuning modes. Its display adapts to flip the display...

TC Electronic has added to their lineup of looper pedals with the Ditto Stereo Looper. Continuing the simplified design of the original Ditto, the new pedal adds three features: stereo input and output functionality, nine-volt battery power, and loop importing and exporting. The Ditto Stereo Looper features a compact design with a single level knob and a single footswitch to...

TC Electronic took the opportunity at the Winter NAMM Show to unveil the new K-Series of bass cabinets. Following in the footsteps of the company’s RS and BC cabinets, the K-Series models are designed to be lightweight with vertical stacking ability. The lineup includes the K210, the K212, and the K410. Each is constructed with a durable plywood cabinet loaded...

TC Electronic has expanded their line of micro bass amplifier heads with the BH550 and BH800. In addition to increased power, the new amps step things up a notch with an expanded EQ section and dual switchable Toneprint effect locations. The BH550 and BH800 start with built-in tuners that handle up to six strings. Their 4-band EQ sections have Bass,...

TC Electronic is re-issuing the original Ditto Looper with a limited edition gold-colored run of the compact looping pedal. Limited to 5,000 units, the pedal will retain the same features as its predecessor including its true-bypass, analog dry-through design. The Ditto Looper simplifies the concept of a looping pedal with a single footswitch for starting and stopping the loop and...