Trace Elliot Announces Pro Series 4×10 and 2×12 Cabinets
Trace Elliot has launched the Pro Series 4×10 and 2×12 cabinets, marking a return to large venue options. The models are a follow-up to their new 1200-watt TE-1200 bass amp head.
Both are built with reinforced 15mm poplar plywood construction covered in a weather-resistant two-stage epoxy coating. The 4×10 is fitted with custom 10-inch neodymium drivers as well as a HF compression tweeter. Their 2×12 has a different design concept.
“Offering thunderous lows to crisp, intelligent highs, the Trace Pro 2×12 cabinet pairs one ultra high-end coaxial 12-inch driver with a 12-inch woofer-only complement,” the company explains. “This highly capable unit can handle the complete sonic palette of the bass guitar. A dual-plane baffle with the coaxial driver is mounted on the slanted portion for superior HF (high-frequency) dispersion.”
Both cabinets are rated at 1,000 watts at 8 ohms. They each have dual parallel Neutrik Speakon 1/4-inch combo input jacks.
The Trace Elliot Pro Series 4×10 and 2×12 will be available this fall for $1,599.99 each.
Trace Elliot Pro Series 4×10 Bass Cabinet Features:
Four proprietary custom 10 Neodymium drivers |
8 Ohms; 1000W(rms) power handling capability |
Trace Elliot HF compression tweeter |
Reinforced 15mm Poplar plywood construction |
Weatherproof two stage epoxy coating with added metal corners |
Dual parallel Neutrik Speakon 1/4″ combination input jacks |
Top and side recessed handles |
Logo and foot/recesses on three sides allow for solid and attractive horizontal or vertical stacking |
Optional 3 heavy duty locking casters and screws included |
Top recess to accommodate the new TE-1200 bass amp head |
Removable protective front panel with magnetic retainers |
Newly designed crossover with improved overload protection |
Trace Elliot Pro Series 2×12 Bass Cabinet Features:
One ultra high end 12 coaxial driver paired with its 12 woofer-only complement |
8 Ohms; 1000W(rms) power handling capability |
Dual plane baffle with coaxial driver mounted on the slanted portion for superior HF dispersion |
Reinforced 15mm Poplar plywood construction |
Weatherproof two stage epoxy coating with added metal corners |
Dual parallel Neutrik Speakon 1/4″ combination input jacks |
Top and side recessed handles |
Logo and foot/recesses on three sides allow for solid and attractive horizontal or vertical stacking with all other TE Pro Series cabs |
Optional 3 heavy duty locking casters and screws included |
Top recess to accommodate the new TE-1200 bass amp head |
Removable protective front panel with magnetic retainers |
Newly designed crossover with improved overload protection |