N-Audio Launches 8×7 and 4×4 Amp Cabinet Switchers
N-Audio has expanded its lineup of switching devices with two new models: the 8×7 Amp Cabinet Switcher and the 4×4 Amp Cabinet Switcher. Each of the rack-mountable units allows you to switch between amplifiers and cabinets quickly without manually routing cables.
“Nine years ago, I released two amps to cabinet switching systems,” N-Audio’s Niki Hristov tells us. “I wanted to improve the whole system allowing more amplifiers and more cabinets plus more features. So this is actually the result.”
As their names imply, the 8×7 allows for connecting up to eight amplifiers and up to seven cabinets, while the 4×4 can connect up to four amps and four cabs. “It is a good choice when you have a few amplifiers and cabinets and want to make a quick comparison between them or just choose your favorite guitar tone,” the company explains. “Also, this system works great for live performance, studio recording, and music shops where a lot of equipment has to be tested or routed quickly.”
The N-Audio 8×7 Amp Cabinet Switcher and 4×4 Amp Cabinet Switcher are available now for $941 and $624, respectively.
N-Audio 8×7 Amp Cabinet Switcher Features:
Up to 8 tube, solid state, bridged mono (floating ground) guitar amplifiers or guitar combos supported |
Up to 7 cabinets. Drive up to 3 cabinets in parallel simultaneously |
Switchable power attenuator insert loop |
Front and rear guitar input |
Tuner output |
Fully protected by independent load resistors and implemented safety functions |
Galvanically isolation between the amps for no hum and noise. |
Instantaneous switching, No pops or clicks. No dead time during the switching. Ideal for live on stage. |
Easy and quick MIDI control and programming |
Dimensions: 19″ 1U rack unit W:48.2cm, H:4.5cm, D:13cm |
Weight: 2kg |
Mains power supply: Universal mains power supply 90-260VAC |
Power consumption: Max 10W @ 110VAC, Max 5W @ 230VAC |
Input impedance: 10 Meg. No active buffers though the signal path |
Tuner output impedance: 10 kOhm |
Designed and handcrafted in Europe |
Lifetime warranty |
N-Audio 4×4 Amp Cabinet Switcher Features:
Up to 4 tube, solid state or bridged mono (floating ground) amplifiers supported |
Up to 4 cabinets |
Power attenuator insert |
Tuner output |
Drive up to 3 cabinets in parallel simultaneously |
Hardware and software protections |
Easy MIDI control and programming |
Dimensions: W:30cm, H:4.5cm, D:13cm |
Available brackets for 19″ 1U rack installation |
Weight: 1.3kg |
Mains power supply: Universal mains power supply 90-260VAC |
Power consumption: Max 10W @ 110VAC, Max 5W @ 230VAC |
Input impedance: 10 Meg. No active buffers though the signal path |
Tuner output impedance: 10 kOhm |
Designed and handcrafted in Europe |
Lifetime warranty |