Skip to main content

Bass Amp Archives - Page 13

Fuchs Announces Bruiser Bass Amp Models
Amps

Fuchs Announces Bruiser Bass Amp Models

After nearly a year of product testing since displaying a prototype at the last Winter NAMM Show, Fuchs Audio Technology has announced three final models of their Bruiser Bass Amp: The Bruiser, the Bruiser-I, and the Bruiser-II. The main difference between each head is power, as the original Bruiser is rated 500 watts into 4 ohms while the Bruiser-I is...

Philosophy Amplifiers Launches Flagship All-Tube Bass Amp
Amps

Philosophy Amplifiers Launches Flagship All-Tube Bass Amp

Philosophy Amplifiers has entered the bass amplifier scene with the launch of their flagship Philosophy amp, a 200-watt all tube bass amp. The class AB amplifier utilizes three JJ 12ax7 preamp tubes and four JJ KT-88 power tubes for it’s all-tube signal path, which the company explains is capable of both clean and overdriven sounds without the aid of pedals....

Glockenklang Goes Lightweight with the Blue Soul Bass Amp
Amps

Glockenklang Goes Lightweight with the Blue Soul Bass Amp

Glockenklang has released details on the Blue Soul, their new 650-watt Class D amp that weighs in at just 5 kg (approximately 11 pounds). With a focus on warmth and detail, the German amplification company says it rings clear as a bell. The Blue Soul features a pair of switchable inputs, with a gain knob and a variable input trim...

Ashdown Engineering Announces Limited Edition Little Bastard LB-550 Amp
Amps

Ashdown Engineering Announces Limited Edition Little Bastard LB-550 Amp

Ashdown Engineering has unveiled a limited edition of their Little Bastard amp head called the LB-550. The new amp couples their Little Bastard tube preamp section with the 550-watt digital power section from their new MiBass head, resulting in tube tone in a lightweight head weighing in at 6.2kg (approximately 13.6 puonds). The preamp uses ECC83 and ECC82 tubes and...

Baer Amplification Now Shipping ML112 Bass Cabinets
Bass Gear

Baer Amplification Now Shipping ML112 Bass Cabinets

Baer Amplification is now shipping their ML112, a 1×12 cabinet that delivers 400 watts at 8 ohms. The release is the first production line available from the manufacturer, who caught attention at the 2010 Winter NAMM show. The ML series cabinets are loaded with neodymium woofers and extended range midrange drivers, which Baer says add more body and punch than...

Thunderfunk Introduces TFB800-B2 Bass Amp
Bass Gear

Thunderfunk Introduces TFB800-B2 Bass Amp

Thunderfunk has unveiled the TFB800-B2 bass amp, rated up to 800-watts RMS at 2 ohms. The new model is an update of the TFB750, combining all the mods that had been added to its predecessor. The TFB800-B2 is housed in an aluminum chassis, weighing in at 21 pounds, and has a plethora of tone-shaping capabilities with a 4-band parametric EQ,...

Bag End Updates TA Series Models
Bass Gear

Bag End Updates TA Series Models

Bag End has updated their TA series with the introduction of the TA1202, TA2002 and the TA6002. Suited for both sound reinforcement and musical instrument applications, the Time Aligned, full-range loudspeakers feature the new and updated E-700 driver, replacing their previous counterparts’ E-600s. The new driver utilizes newer materials and offers better high-frequency response and lower rates of distortion at...

Peavey Releases Updated TNT 115 and TKO 115 Bass Combos
Bass Gear

Peavey Releases Updated TNT 115 and TKO 115 Bass Combos

Peavey has released updated versions of their TKO and TNT 115 bass combos. Rated at 400 watts and 600 watts respectively, the amps are fresher takes on the models which debuted over 30 years ago. There are several factors the TKO and TNT share – a 15″ loudspeaker, a tilt-back design, a seven-band graphic EQ with high and low shelving...

Kustom Unveils KXB500 Bass Amplifier
Bass Gear

Kustom Unveils KXB500 Bass Amplifier

Kustom Amplification has introduced the KXB500 bass amp, a no-nonsense amp built for a big sound while staying compact. The amp is rated at 500 watts and has a total of five control knobs, and weighs in at five pounds. The KXB500’s input stage accommodates for a range of signal levels features a clip LED and mute switch. Tone controls...

Fender Introduces Bronco 40 Bass Amp
Bass Gear

Fender Introduces Bronco 40 Bass Amp

Fender has introduced the Bronco 40, a bass amplifier with built-in effects and amp modeling. The 1×10 combo also includes Fender’s FUSE software and USB connectivity, allowing it to function as an audio interface with DAWs as well as tweak and swap presets online. Rated at 40 watts, the amp has 24 on-board presets using 8 amp models including the...