ISP Technologies To Debut Beta Bass Preamp Pedal at NAMM
ISP Technologies will be unveiling a new pedal version of their popular bass preamp at the Winter NAMM Show this month. The Beta Bass Preamp Pedal is powered by an external 9-volt AC adaptor that is then internally multiplied to provide plus or minus 15-volt power supply for a “full 30 volt signal swing.”
Its EQ section includes a bass and treble boost/cut knobs as well as two semi-parametric mids with separate sweepable frequency and boost/cut controls. ISP also loaded the pedal with their Time-Vector based compression, a phase manipulation exciter, and split-band distortion circuit, and a Decimator noise reduction control. Finally, an XLR direct output allows for easy connection to a mixer.
The ISP Technologies Beta Bass Preamp Pedal is made in the USA. It will debut at the NAMM show later this month and will carry a retail price between $429 and $449.
ISP Technologies Beta Bass Preamp Pedal Specs:
| Input Impedance: | 500K ohms |
| Maximum Input Level: | +20dbu typical |
| Maximum Output Level: | +20dbu typical |
| Bass Treble Cut Boost Level: | +/-15db |
| Mid1 parametric frequency range: | 60Hz-1kHz |
| Mid2 parametric frequency range: | 200Hz-6kHz |
| Compression Section: | Based on Time Vector Processing adaptive response auto makeup gain |
| Decimator Noise Reduction: | Greater than 80db |
| Power Requirements: | 9V AC 1500mA power adaptor |
| Max Current Draw: | 865mA |
| Dimensions: | 7″ x 5″ x 1.9″ |
| Weight: | 2.2 lbs |
For more information:
ISP Technologies
I can’t believe you are still refusing to review the new Ampeg pedal! /jokes ;)