Pedals & Effects - Page 47

Crazy Tube Circuits is expanding their bass effects line with the Locomotive. Debuting at the Winter NAMM Show, the pedal will offer real tube overdrive to players. “[The Locomotive features] a 12AY7 tube for warm organic tube grind with excellent touch sensitivity and dynamic response,” Crazy Tube writes. “We provided a wide range of gain that can produce from a...

Electro-Harmonix has pushed their looping pedals to the max with the new 95000 Performance Loop Laboratory. Featuring six mono tracks with one stereo mixdown track per loop, the unit can record up to 375 minutes and 100 loops with a 16GB Micro SD card. The 95000 has MIDI capabilities, and the company says nearly every function of the pedal can...

EvenMidi has updated their H9 MIDI controller with a host of new features. Designed for the Eventide H9 as well as other devices, the unit offers control of up to four devices simultaneously or switching from one to the other. It has nine banks of three presets for a total of 27 presets that can be customized. It works with...

Mattoverse Electronics has released the TetraStep MkII, an updated version of their four-step square wave sequencer. It has four pitch controllable steps with on/off buttons for each step. Users can adjust the rate, tone, pitch, and volume of each step. The MkII version adds a slew of new features including a Tap Temp footswitch, Sync In and Out functionality, illuminated...

Earthquaker Devices has introduced the Westwood, a pedal they describe as “a mild mannered light-to medium-gain translucent overdrive manipulator.” Its EQ section includes Treble and Bass controls with up to 20 dB of cut/boost while its drive section offers a host of tones. “The Westwood’s Drive control sets the level of gain for a near-clean boost at lower settings, to...

If you’re looking to blow up your bass sound, Death By Audio has you covered with their new Absolute Destruction pedal. Utilizing a power amplifier IC, the unit offers a distortion as well as what its name implies. “Showing little to no respect for what instruments normally sound like, or even what many people want them to sound like, we...

Electro-Harmonix reached into their past to reissue the Op-Amp Big Muff Pi from the late ’70s. The new pedal is faithful to the original 1978 design with a few new features including a compact, die-cast chassis, and true bypass switching. “The pedal relies on op-amps rather than transistors and three gain stages rather than four, to create its signature sound,”...

London’s Fredric Effects has expanded their tonal palette with the BugCrusher, an analog sample rate reducer that produces an aliasing effect. Although its name makes it sound like it is a BitCrusher, Fredric writes that’s not the case. “Despite the name, the BugCrusher is not an actual BitCrusher. Most BitCrusher effects will have sample rate (x-axis quantization) and bit depth...

Ashdown has expanded their lineup of signature gear with the Norman Watt-Roy Special Edition OriginAL Pre-Di. Watt-Roy, who is best known as the bassist for Ian Dury and the Blockheads, helped create the unit. “Strictly limited to a run of 50 special units, the special edition Norman Watt-Roy OriginAL Preamp Pedal has been tweaked to Norman’s specification,” Ashdown writes. “As...

Pigtronix has expanded their micro pedal lineup with three new pedals: the Gatekeeper Micro noise gate, Class A Boost Micro clean boost, and all-new Octava Micro octave up/drive/fuzz. Each of the units features true bypass switching and a housing with dimensions of 3.75 inches by 1.5 inches by 1.75 inches. The Class A Boost Micro utilizes discreet J-FET transistors in...

Japan’s Free The Tone has released the PA-1QB, a programmable 10-band EQ pedal for bass. The device’s signal path is analog with a digital parameter control section for storing and processing your settings. The pedal revolves around the Holistic Tonal Solution, or HTS, circuit that has been revamped for 2018. “It holistically manages high-quality guitar/bass signals from input to output...

Z. Vex Effects has introduced a new vertical version of their Vexter Fuzz Factory pedal. Formerly configured as a horizontal pedal, the new VFF will feature the same effects and circuitry in a more pedalboard-friendly setup. It utilizes two new old-stock ’60s germanium transistors, but that doesn’t mean it’s a vintage sound. “The circuit is not modeled after any classic...