Pedals & Effects - Page 54

Seymour Duncan has added to their lineup of bass products with the introduction of the Studio Bass Compressor, a pedal the company says is designed to provide increased sustain, accentuated picking and evened out single-note runs. The pedal is designed for versatility while keeping things intuitive. I has Level, Attack, and Compression knobs for controlling the tone, while a Blend...

DOD is getting heavy with the new Boneshaker, a distortion pedal aimed at bass, baritone, and extended-range guitars. The circuit was designed by Black Arts Toneworks to focus on anything “heavy, loud and low.” The Boneshaker has Distortion, Depth and Level controls for dialing in the type of distortion. Its twist is a 3-band parametric EQ section that includes Low,...

Eden Amplification was showing off its new CaliforniWAH bass filter pedal at the Winter NAMM Show this year. The new pedal is designed for versatility with two different voicing settings and four effect parameters. The Californiwah has four control knobs: Low Point, Sensitivity, Resonance, and Effect Level. Low Point adjusts where the effect starts in your sound, where Sensitivity controls...

Boss has introduced the BB-1X Bass Driver, a compact pedal that employs the company’s MDP technology to offer sounds ranging from natural clean tone to a heavy distortion. Beyond a drive pedal, the BB-1X has EQ controls and a 1/4-inch line output to add preamp and DI functionality. The pedal’s distortion circuit analyzes your bass signal to respond to your...

Morley debuted the Cliff Burton Tribute Series Power Fuzz Wah at the Winter NAMM Show this year. Introduced in part with the bassist’s father Ray Burton, the pedal is a tribute that blends aspects of the 70’s model used by Burton on the early Metallica recordings and the company’s modern models. The Power Fuzz Wah’s fuzz and wah effects can...

Ampeg’s booth at NAMM this year featured their new revamped BA combo series, but it centered around the unveiling of their brand new SCR-DI. The bass-friendly direct box is their first new pedal in years and brings together an Ampeg preamp, EQ section, and their Scrambler Overdrive. The SCR-DI starts with a legacy Ampeg preamp with tone stack circuits, which...

After introducing the Bassbone OD last year, Radial Engineering is updating the original Bassbone with the Bassbone V2. The second generation device features a dedicated effects loop, a combination power booster-mute footswitch, and a piezo optimized input for upright bass. “We recently launched the Bassbone OD which has gained tremendous attention from many of the world’s most prominent bass players,”...

Aguilar unveiled a new pedal at this year’s NAMM Show this year called the Fuzzistor. The bass fuzz pedal features a classic silicone transistor distortion circuit for a retro, fuzzy ’70s tone. The Fuzzistor allows for dialing in your tone with Level, Blend, Tone, and Fuzz controls. Aguilar says the Fuzz control ranges from “subtle to crushing,” while the Blend...

Electro-Harmonix has announced a bass-specific version of their Soul Food natural overdrive and clean boost pedal. The company describes the pedal as designed to enhance the original sound of your instrument while retaining its essential character. The Bass Soul Food is set apart with a gain stage, treble control and signal path optimized for bass guitar with more low-end definition....

ISP Technologies will be unveiling a new pedal version of their popular bass preamp at the Winter NAMM Show this month. The Beta Bass Preamp Pedal is powered by an external 9-volt AC adaptor that is then internally multiplied to provide plus or minus 15-volt power supply for a “full 30 volt signal swing.” Its EQ section includes a bass...

Red Panda has introduced the Bitmap, a bitcrusher pedal designed to work with bass, guitar, synthesizers, drum machines and more. The stompbox features fractional bit reduction with a new bit crushing algorithm that the company says adds the warmth and grit of classic 8- and 12- bit samplers. It also goes down to 1-bit resolution for grittier square wave fuzz...

T-Rex Effects will be introducing a new line of pedal boards at the 2015 NAMM Show. The ToneTrunk boards will feature a two-tiered design for better access to the back row as well as providing space for cables. The pedal boards will come in four sizes: 27.5″ x 12.4″, 22″ x 12.4″, 17.7″ x 12.4″, and 22″ x 6.2″. Each...