Amp Archives - Page 6

Peavey announced a pair of new compact bass heads at NAMM this year with the MiniMax and the MiniMega. The amps are rated at 400 and 1000 watts, respectively, and weigh in at five and eight pounds. The 400-watt MiniMax’s preamp is loaded with a 3-band EQ accented by Punch, Mid-shift, and Bright controls for further tonal shaping as well...

Hartke’s new HD Series of bass combos loads the company’s HyDrive speakers into four models aimed at the beginning or intermediate player. Starting with the 25-watt HD25, each model steps up in speaker size, wattage, and features. Common features to the series include a built-in limiter, an 1/8″ auxiliary input, and a 1/4″ headphone output. The HD25 is built with...

Orange Amplification introduced the new OB-1K bass amplifier at the NAMM Show this year. The 1000-watt solid-state amplifier is inspired by bi-amping and splits the signal into two separate paths. The first side offers a tight, clean bass sound while the second features two stages of controllable gain and is rich in upper harmonics. Each channel can be toggled or...

Traynor has expanded their Small Block series of bass heads with the SB500H. A companion to last year’s SB200H, the new amp delivers 500 watts while weighting a mere four pounds. The SB500H retains many of the same features of its smaller brethren, including active and passive inputs, a 4-band EQ with low and hi mid controls, and the company’s...

Carvin has announced the BX700, an evolved version of their BX500 bass amplifier. The new head unit combines a Class A preamp with a Class D power section rated up to 700 watts at two ohms. Remodeled in a red-faced chassis, the BX700’s controls include three EQ sections. The Contour knob controls an adjustable preset EQ curve that is flat...

EBS will be releasing the Classic 500, a solid state, retro-styled bass amp. Building upon the company’s Classic 450, the 500 is rated at up to 500-watts at 2 ohms while fitting into a more compact casing. Although the Classic 500 is a solid-state amp, EBS says its sound is aimed at capturing a classic tube amp tone. Controls include...

Hevos is continuing their series of compact bass amplification units with the release of the 400S bass amp, a 400-watt head that weighs 4.4 pounds. Based on a Class-D power amp, the 400S is designed for both electric and upright bass. The 400S has two input sections with separate gain controls to allow for plugging in two basses at once,...

Hevos has introduced the 2×6, a compact bass combo amp fitted with a pair of 6″ loudspeakers. It utilizes the company’s 400C amplifier, which includes a Class-D power amp rated at 400 watts. Features include two separate inputs, a mute for tuning, -6dB pad and a phase switch the company says is great for double basses with two pickups. The...

Ampeg has reintroduce the V-4B, a 100-watt all-tube bass amp. Based on the company’s classic amp from the ’70s, the new head is described as offering the tone of an SVT while weighing half as much. The new V-4B’s preamp includes a pair of 12AX7 tubes while the driver has a 12AX7 and one 12AU7, and its power amp contains...

Phil Jones Bass has introduced the Double Four, a new 70-watt combo micro-amp that is roughly the size of a shoebox. Sporting a pair of Neo Power 4-inch drivers, the Double Four features a new driver design, acoustic loading, and separate PWM amplifiers for each speaker. The backs of the speakers are loaded with a Rectangular Auxiliary Low Freqency Radiator...

Peavey is upping their heavy duty amp offerings with the Michael Anthony Signature VB-MA bass amplifier, which the company unveiled at NAMM this year. The former Van Halen/current Chickenfoot bassist’s new rig came about after road-testing Peavey’s VB-3 and offering personal suggestions to the design. The VB-MA is a 300-watt all-tube head that weighs in at 38 pounds. Similar to...

Warwick has entered the lightweight amp market with the new LWA 1000, a six pound bass amp rated at 1,000 watts at 4 ohms. Featuring a Class A preamp and Class D power amp section, the LWA 1000 has two identical channels with individual mutes, 4-band EQs, built-in compressors, and gain controls. Connectivity on the amp includes an auxiliary input,...